How To Install Ring Doorbell On Narrow Frame? 4 Ways
Installation of a ring doorbell on a narrow frame is a bit more tricky than on wide doorframes.
However, some doorbells are designed specifically for narrow doorframes and do not require much installation effort.
If you’ve got one, let’s start the installation process.
How to install ring doorbell on narrow frame?
Use a wedge kit that will allow you to replace the mounting bracket so that it fits your narrower frame.
Another option is to use double-sided tape.
This tape can be used to securely attach the ring doorbell to your narrow frame.
Wait, we’re not done yet!
I’ve got a few other ways to mount a ring doorbell and also I’m going to discuss all the methods with the step-by-step guide.
So, if you’re ready to install your ring doorbell camera on a narrow frame then this explanation is useful.
4 Ways To Install Ring Doorbell On Narrow Frame
Here are the top 4 methods, and any of them can help you to install and fix your ring doorbell.
Try any of them, and if it doesn’t work for you, go to next.
I’m pretty sure one of them can solve your problem as they were also useful for me.
Here is the list of 4 solutions
- Install a Wedge Kit
- Use a Corner Kit
- Fix on the Wall Instead of the Door
- Use Double-Sided Tap
Method 1: Install a Wedge Kit
If you want an easier and faster installation of your ring doorbell, then go for a wedge kit.
It will take only a few minutes to install your doorbell with the help of this wedge kit.
This is how you can do it.
- Remove your old doorbell (if you have one) or wherever it was attached.
- Take the wedge kit out of the box and place it against the frame where you want to install your ring doorbell.
- Make sure it is level, and then use a pencil to mark the four holes.
- Take a drill and make four pilot holes.
- After that, attach the bracket to the frame with screws and washers.
- Now, take your ring doorbell and fit it into the bracket.
- That’s it; your installation is complete.
Method 2: Use a Corner Kit
If you want to install your ring doorbell at the corner narrow frame, then this method is for you.
In order to use this method, you will need a corner kit that will cost you around $15 (Buy On Amazon).
This is a special type of bracket that is designed to install the ring doorbell at the corner of any door frame.
The installation process of this method is quite similar to the first one.
- Start by taking your old doorbell off.
- Put the corner kit on the frame where you want your Ring doorbell installed.
- Mark the place with a pencil and drill four holes.
- You’ll need screws and washers to attach the bracket.
- Put your ring doorbell in the bracket.
Method 3: Fix on the Wall Instead of the Door
If you don’t want to install your ring doorbell on the door then you can also fix it on the wall.
For this method, you need to buy a mounting plate that will cost around $20(Buy On Amazon).
Wall brackets for installing ring doorbells are designed specifically for this purpose.
The process is completely the same as guided above.
The only difference is now you’ve to repeat all the steps on the wall.
Method 4: Use Double-Sided Tap
If you want a temporary installation of your ring doorbell then you can use a double-sided tap.
This is the easiest and quickest method to install your Ring doorbell.
For this method, you need to buy a double-sided tap that will cost around $10(Buy On Amazon).
Attach the double-sided tap on the door frame and fix the doorbell on it.
You can also use a tap above the doorbell where you find some free space.
However, this method is only a temporary method, not permanent and secure. So there’s a risk of Doorbell theft as well.
Things You May Require For Mounting Doorbell
Now you know the different methods that can be used to install a ring doorbell on a narrow frame.
But there are some things that you may require for this installation process.
Let’s have a look at them.
Frequently Asked Questions (FAQs)
How do you install a ring doorbell on a narrow frame?
You can install a ring doorbell on a narrow frame in a few different ways.
One way is to use a mounting bracket that attaches to the doorframe instead of the wall.
This bracket can be adjusted to fit frames of different widths. You can also use a wedge kit to attach the ring doorbell to the wall if there is narrow space on the frame for it.
Is it safe to install a Ring doorbell on the narrow frame?
Yes, it is safe to install a ring doorbell on a narrow frame.
But you need to ensure proper installation to avoid damaging your door and ring; use the included spacers.
The best practice is to make sure that the installation does not obstruct the power source (i.e., battery).
Considering these points, installing a Ring doorbell on a narrow frame is completely safe.
Can you install a ring doorbell on a wall?
Yes, you can install a ring doorbell on a wall.
The best way is to do this with the included hardware.
For this, you must screw four screws into the chosen wall space.
Two of these screws go into studs to provide extra support.
After that, attach your ring doorbell.
Conclusion
Doorbells are a great way to keep your home safe and they are becoming more and more popular.
The Ring doorbell can be installed on a narrow frame, so no matter how small your doorway is, you can still enjoy the convenience and security of a Ring doorbell.
Follow any of the above methods, but the first one is the most reliable.
Related Articles
Home Automation Expert
David
Hi! I’m David — a writer, blogger, and proud owner of Smarterve. I’ve been using smart home gadgets and in the home industry for about a decade. I love to solve problems, give suggestions, and create ease for people to enjoy life. This blog is where I can share tips and provide solutions to everyone using smart gadgets.
The four methods for installing a Ring doorbell on a narrow frame were a game-changer. It’s like cracking a code for securing the home entrance with limited space.
Thanks for your positive feedback, Alejandro De La Garza!
The content is a valuable resource, but I’m curious if there are specific Ring doorbell models that are better suited for narrow frame installations. Are there any compatibility considerations users should be aware of?
Great to hear you found the content valuable! While the methods are generally effective, it’s a good question to ask about specific Ring doorbell models for narrow frame installations. Compatibility considerations are important, and we recommend checking the Ring website for compatibility details and user reviews for real-world insights.
The content’s step-by-step guide for installing a Ring doorbell on a narrow frame is incredibly helpful. I appreciate the level of detail provided. It’s like having a professional walk you through the process, which is invaluable for those less experienced with home security installations.
Thank you for your appreciation, SpineCare NYC! We’re glad to hear that you found the step-by-step guide for installing a Ring doorbell on a narrow frame incredibly helpful.