How To Connect Optical Cable To Samsung TV? Simple Guide

Samsung televisions are excellent, but unless you purchase one of the premium models, you should consider upgrading your audio setup to increase your satisfaction.

And using an optical digital audio cable makes things simple and hassle-free.

But how to connect optical cable to Samsung TV?

You may connect your Samsung TV to a stereo speaker or home theater system with the following steps.

How To Connect Optical Cable To Samsung TV?

What Is An Optical Cable?

An optical cable is a kind of physical connection that may be used to transmit digital audio signals through light.

When observing the transmission process, light travels through the optical cable before being transformed into electrical pulses that carry the audio data.

To make the electrical pulse audible, it must first be transformed into an analog audio signal before being amplified by a device at its final destination, and it is also capable of receiving such signals.

The optical cable has a smaller transmission loss than metal cables making it ideal for long-distance transmission, and it may be utilized semi-permanent.

What Is An Optical Cable

Why Should We Use It?

The ground loop is a potential problem when working with audio equipment.

When electricity is grounded in several ways, a ground loop and an earth loop occur.

This creates electromagnetic interference, which the cables pick up and transmit to your audio equipment as a hum.

Your machinery is at risk if you do this.

Why Should We Use It

Find the alternative ground route and destroy it to end the problem.

It is not always as simple as it seems, particularly if you’re renting an apartment.

Here is when the heroic optical cable steps in.

Swap out the copper wire with an optical connection to isolate the gadget.

As if by magic, that bothersome hum will vanish.

It’s hardly magic, to be honest.

Plastic and glass are used to construct optical wire.

There is no noise pickup in the cable since there is no conductor.

If you require longer cables, optical wire is a good option.

As its name suggests, HDMI is intended for use at close range.

Due to its copper construction, HDMI is susceptible to signal attenuation.

The maximum distance for an HDMI cable is around 15-25 feet before the signal begins to degrade.

For HDMI, the longer the cable, the worse the quality.

An optical cable is a far better option if you need a connection.

Because light cannot be exhausted, optical cables may transmit data without degradation at an extension of as much as 33 feet.

It is also compatible with multichannel recordings like Dolby Digital & DTS 5.1, often used in home theater setups.

Optical cable is not compatible with HD audio standards like Dolby TrueHD or DTS HD Master Audio.

However, they remain an excellent medium for transmitting high-quality audio between your gadgets.

How To Connect Optical Cable To Samsung TV?

Short answer: There are four simple steps you can do.

Step 1

Figure out where the optical cable input is located on your Samsung TV.

If you don’t know where to enter the optical cable into the TV, you can begin to connect your two gadgets.

The optical cable port is often located at the back of a Samsung TV.

Here, you will plug in the optical cable that will send the audio to the other devices.

Step 2

Attach the optical cable to the two of your gadgets.

Your Samsung TV has a digital audio out jack that should be used to connect the cable’s other end.

Attach one end of the optical cables to its Digital Audio In port to utilize an external speaker or any device.

Step 3

You may take the remote control once the cable is plugged into both machines.

Select the Home option.

When the main page loads, look for the Setting link and choose it.

Step 4

Find the audio setting and choose the appropriate output.

If you use an optical cable, go to the settings menu and choose Audio Out/Optical.

After these steps, your Samsung TV should be able to send audio to an external sound system through the optical connection.

Now, you can enjoy your movies or songs with high-quality sound.

Conclusion

All in all, how to connect optical cable to Samsung TV?

With my four simple steps, you can easily do this task to increase the quality of audio signals while watching your favorite shows or songs.

Almost all audio equipment can be used with your Samsung TV; you just need an optical cable.

Unlike HDMI, they will not be affected by long distances and do not make noise.

Related articles

3.4/5 - (5 votes)
David owner of Smarterve.com

David

Hi! I’m David — a writer, blogger, and proud owner of Smarterve. I’ve been using smart home gadgets and in the home industry for about a decade. I love to solve problems, give suggestions, and create ease for people to enjoy life. This blog is where I can share tips and provide solutions to everyone using smart gadgets.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *