Vizio TV Won’t Turn On (5 Easy Fixes To Try)

Vizio TVs are one of the best TV brands, without any doubt.

But over time, they can create problems as well.

For example, your Vizio TV won’t turn on.

Well, this is not a big issue that you can’t fix on your own.

Here is a quick solution!

First of all, you have to reset the TV.

For this unplug the power cable for at least 60 seconds and then plug it back.

Please turn on the TV, it’ll work.

The second fix is to check the power outlet’s serviceability.

Finally, you can reboot the system directly from the TV buttons.

When you apply any of these methods, you can be sure your TV will start if there is no significant technical issue.

However, below I’ve discussed a step-by-step guide on how to apply these fixes.

So, let’s get down to the business.

5 Easy Fixes: Vizio TV Won’t Turn On (Fix It Now)

Vizio TV Won't Turn On: 5 Easy Fixes To Try

Check Your Vizio TV’s Power Supply

The most common issue in electric products that has been recorded is their power supply cable issue.

Sometimes, it becomes faulty, and a few times, we forget to check it.

So if you think your TV was just working perfectly when you left it, but now it’s not working, then the first action to apply is power cycling.

Here is how to apply this.

  1. Unplug the power cable from the electric board.
  2. Wait for at least 60 seconds.
  3. Plug the cable back into the eclectic board and switch on the TV.

Check out if the TV standby light is on or not.

If the light is on, but TV is not working, then it may be the reason your remote is not working.

A chance is the TV remote battery is not working.

Change the battery and try it again.

At the same time, if the standby light is off, there are two chances:

  • The TV is on, but it shows a blank screen.
  • In this case, press the menu from the remote or directly from the TV. The TV screen may turn on.
  • The second reason can be the power source. Check the electronic power source and make sure it is working properly.

Check the Input and Power cord

Before moving on to the critical steps, a quick suggestion is to check your electric board where you plug in the power cord.

Try to plug in any other device, like a blender or mobile phone charger.

Please remove the power cord from the back of the TV.

Clean and make it dry and dust-free. Plug it back in the cord point.

If you have a working device, but your TV does not, you can follow the next steps.

Nonetheless, if the devices do not work, you should first fix the switch.

Hard Reset Vizio TV

Do you know the exciting part of the Vizio TV, you can reset the TV when its screen is off.

Alternatively, if neither of the two methods above works for you, another option is to factory reset your TV.

Notice: if you factory reset your TV, all the apps and previous user settings will finish.

The choice is yours whether or not to try this.

Typically there are two methods to reset Vizio tv via remote and directly through the TV buttons.

I’ll share both methods with you.

Reset Via Remote

Start with unplugging the tv router and then select Menu from the remote.

Go to the System option and press OK.

Select the Reset & Admin option.

Here, you need to provide the four-digit parental lock.

If it’s default, then use 0000 as the lock code.

You must agree to Reset and then OK.

Automatically, it will turn off, and then it will start the resetting process.

Wait for 5 minutes to complete the resetting option, then Plug in the router, and the TV will start working.

Reset Directly From TV

Plug in the router and turn on the TV via the power button.

Press the Volume-low and Input buttons, hold for 20 seconds, and then leave.

Now again, press the input button for the next 10 seconds.

Wait for 2 minutes to let the TV start the resetting process.

If the method works successfully, the TV will turn on with a screen display.

Less Power Voltage

One possibility is that there is less power voltage getting to the TV.

There are several reasons for this, including a blown fuse, tripped circuit breaker, or a bad power cord.

If you’ve checked all of those and determined that they’re not the problem, then it’s possible that the problem is with the TV itself and it will need to be repaired or replaced.

Get Help From the Seller/Manufacturer

Is your TV still under warranty?

If yes then you’re in good luck.

You can call directly to contact your seller from where you purchased the TV.

Tell them the issue, and their technician will solve it without any fee.

If don’t have a warranty, you can still contact them for assistance.

But you may have to pay the service fee.

If you bought the TV directly from the Vizio company then you can contact them from the Vizio official website support page.

Bottom Line: having technical issues in smart devices is common, so you don’t have to panic at all.

By applying any of the above methods, this situation can be resolved.

However, if all of them don’t work, you can hire a Vizio TV technician to solve the problem.

They will solve your issue within a day as this kind of repair doesn’t require too much time.

Frequently Asked Questions (FAQs)

Why is my Vizio TV not turning on?

Here can be a few reasons:

  1. The TV is not plugged in properly.
  2. Check the electricity voltage; it can be low.
  3. Check the power cord cable; it can be not very accurate.
  4. May the remote is not working due to a dead battery.
  5. The TV is on, but the standby light is not working.

What to do when Vizio TV won’t turn on?

Here is a possible reason why your Vizio TV won’t turn on.
The power cord should be securely plugged into the back of the TV and the TV must be plugged into an outlet.

The power supply may be faulty if you can’t get the TV to turn on after plugging it in.

See if the problem can be resolved by plugging the TV into a different outlet.

Is there a power reset button on a Vizio TV?

Yes, Vizio TV has a power reset button on the back-right side of the TV.

However, the placement can be changed due to the model type.

The Vizio TV remotes also have a power reset option.


I’m not sure you’ve got the solution, but the quick methods you can apply by yourself, I mentioned above.

Rest all the methods are techniques that I’d prefer not to try at home.

Yes, you can if you’ve technical knowledge, otherwise you’ll end up in failure plus financial loss.

So, if all the methods don’t work, hire a professional who is an expert in fixing this kind of issue.

Rate this post

Similar Posts