(Fixed) Why Is The Blink Camera Not Detecting Motion? 6 Reasons

Blink security camera is a state-of-the-art Amazon product implemented in smart homes.

It is way more efficient than traditional security cameras in terms of battery life, motion detection, video quality, and weather disruption.

The camera comes in various models and is built for different purposes.

Though Blink cameras are the best security hardware in the market for motion detection, you may encounter several bugs and issues at least once during your use.

This might happen due to configuration issues of the device.

So, why is the Blink camera not detecting motion?

This could be caused due to numerous reasons, but the most common reason that is reported is that the motion detection feature is manually turned off.

To enable it, tap the grey running man icon, which should turn blue, indicating that it is now activated.

The power saving mode is sometimes turned on, which could also disable the motion detection system.

If this doesn’t fix the problem, you can find other possibilities that could have been the source of this issue and how they can be countered further in this article.

6 Possible Reasons the Blink Camera not Detecting Motion

6 Reasons Why Is The Blink Camera Not Detecting Motion? 

I have narrowed down the most commonly known problems that cause this motion detection issue.

You will most likely find the solution through these methods:

1. Large Distance of Sync Module from Camera

The Sync Module is the brain of the camera.

The sync module is the camera’s component that receives information from the Blink servers through the Wi-Fi network and communicates with the camera in real-time.

Large Distance of Sync Module from Camera

If this component is placed far from the camera, the camera would be unable to process the motion detection as it is done through the sync module.

Best Solution

To fix this, try reducing the distance between the sync module and the camera to improve connectivity signals so that the motion detection can work properly.

You can also attach the sync module to the camera through various means if you have a single Blink device.

Ultimately, this will fix the motion detection issue.

2. Battery Issues

Battery Issues

The Blink security cameras have had known battery issues for a long time.

The camera’s intensive work requires high power and can only fit in two batteries simultaneously.

So, don’t get surprised if you encounter any battery problems.

The low battery or faulty battery in Blink cameras can cause motion detection setting errors.

Best Solution

The most common solution to fix the battery issue is to change them with new ones.

They are standard AA camera’s batteries and can be bought from any electronics or grocery store.

Removing and re-inserting the batteries also, in some cases, fixes the issue.

While talking about power issues, it should also be noted that the power saving mode is sometimes turned on, which disables the motion detection system.

So, it is also recommended to double-check and disable the power-saving mode for the motion detection to run correctly.

3. Sensitivity Issues

Sensitivity refers to how much activity the Blink cameras need to detect motion.

If you are new to this technology, there is a high probability that you don’t know how to configure the sensitivity settings.

If your sensitivity is low, the Blink cameras might have difficulty detecting motion if the object is not moving fast enough, so it will not record.

Sensitivity can be changed in the Blink app’s motion detection section.

4. Firmware Update Issues

The software, as well as the firmware of the Blink devices, is updated continuously.

Sometimes, these updates cause the device’s permissions to reset and the camera’s functionalities to be turned off.

Permissions have to be turned on for the camera to function correctly.

If you find these permissions turned off, you have to manually turn these permissions or functionalities on from the Blink app for the camera to work according to your desires.

Other than that, ensure you save your changes because it does not save them automatically.

5. Incorrect Blink Camera Settings

Incorrect Blink Camera Settings

One common reason why a Blink camera may not be detecting motion is due to incorrect camera settings.

To ensure that the camera is set up properly, users should check the motion detection settings within the Blink app.


This includes adjusting the camera’s sensitivity slider, setting up activity zones on the camera, and checking the motion detection feature.

Additionally, you should check that the camera is properly connected to the sync module and that the device has a stable internet connection.


6. Incorrect Blink Camera Placement

Another reason why a Blink camera may not be detecting motion is due to improper camera placement.


To ensure that the camera is able to detect motion, users should place their Blink cameras in areas that are easily visible and where they will be able to pick up motion.

How to Reset Blink Camera That is Not Detecting Motion?

6 Reasons Why Is The Blink Camera Not Detecting Motion? 

If your Blink camera is not detecting motion, you can fix all its issues by resetting the device.

But the only issue is it will erase all your preferences and previous settings.

So, make sure you mark down your settings.

Here are steps to reset the Blink camera motion detection issue through the Blink camera device.

  1. The Blink camera has a small hole under the bottom.
  2. The factory reset button is located in the hole, so you don’t reset the device unintentionally.
  3. To rest it, take a small needle or a paper clip and press the reset button for at least 30 seconds.
  4. After pressing the reset button, your device will return to the factory default settings.

After resetting the device, go to settings and set the motion detection system.

Then fix the camera near you for testing purposes, move around, and check whether the camera is detecting motion.

How to Reset Blink Camera That is Not Detecting Motion

Why isn’t Blink Camera Recording Everything?

Most people are prone to the misconception that Blink cameras offer continuous recording.

They only record clips when motion is detected.

If your camera is not recording any activity at all, you should check whether you have granted permission to the Blink app to save clips on your device.

You can always upgrade your subscription if you want to increase your recording limit.

To know whether your camera is recording, check if there is a blue blinking light, which indicates that the camera is now recording.

Frequently Asked Questions (FAQs)

What is the range of the Blink camera?

The range of the Blink camera is reported to be up to 20 feet.

If your camera cannot recognize objects that lay far from this range, that is because the camera encounters difficulty in detecting objects that far.

You can install the camera where you think the objects would be within 20 feet when they enter the frame.

Also, set the sensitivity nearest to what you think the speed would be of the object.

Can the Blink cameras work without an active Wi-Fi connection?

In short, you cannot run the camera without an active Wi-Fi connection because the internet is essential for the Sync Module to function correctly.

The camera and Sync Module to perform all its functionalities optimally.

It is recommended to have an active Wi-Fi all the time of 2.4 GHz with an internet connection of at least 2 Mbps.

Why is the Blink camera not detecting motion at night?

The Blink camera will not detect motion at night if the NIGHT VISION is not turned on.

To turn it on, go to Blink app settings, and Turn on the IR LED.

You can also set it to auto-detection.
Hence it will turn on the Night Vision when the light goes down in the evening.


Suppose all the methods mentioned above are not working.

In that case, it is possible that your camera has gone old and cannot detect motion because it has lost that capability.

This would be an excellent time to get a newer model that fulfills your requirements or contact support and describe your issue.

They will make sure you get a solution.

You can also increase camera motion detection by going into Blink app settings.

Blink is constantly adding new features and updates to their devices.

Although these updates are installed in older models, it is still recommended to use later models because they come with improved hardware.

Related Articles 

Rate this post
David owner of Smarterve.com


Hi! I’m David — a writer, blogger, and proud owner of Smarterve. I’ve been using smart home gadgets and in the home industry for about a decade. I love to solve problems, give suggestions, and create ease for people to enjoy life. This blog is where I can share tips and provide solutions to everyone using smart gadgets.

Similar Posts


  1. It’s a shame you don’t have a donate button! I’d definitely donate to this superb blog! I guess for now i’ll settle for bookmarking and adding your RSS feed to my Google account. I look forward to new updates and will share this website with my Facebook group. Talk soon!

  2. The content was spot on! Following the troubleshooting steps resolved the motion detection issue with Blink camera. Great work!

  3. Adding preventive measures or maintenance tips for avoiding future motion detection problems could be beneficial.

Leave a Reply

Your email address will not be published. Required fields are marked *